Ortoalresa’s distillers allow obtaining distilled water from the water supply, with ideal characteristics for its use in other equipment and appropriate for laboratory use: reagents preparation, bacteriological cultures, final cleaning of glassware, etc. Designed for applications according the standard:

ASTM D 1193

Features

• Automatic distillers of continuous production and with water flow control.

• Stainless steel for the inner and the inner heater, stainless steel painted with epoxy for housing.

• Reduced size.

• Easily removable for its cleaning.

• High quality of distillation: obtains water of types III and IV (laboratory degree water)

• Conductivity at 20ºC: 1,5 microsiemens/ cm.

• Resistivity at 20ºC: 0,67 megaohms/ cm.

• PH outcoming water between 5-8 (DA 006) at 25º C. Easy to use

• Control panel with general switch and light signals.

• Water in-put connection adjustable to the feed tube.

• Cooling water drain outlet connector adaptable to containers. Safety

• Safety mechanism that disconnects the resistances in case of cooling water failure and connects them again when the cooling water recovers.

• Electric: earthed.

• Sealed with a silicone gasket.

• Safety system with hydraulic manager of temperature that protects the distiller in case of overheating.

• Optional accessory for limiting the flow of water optimizing the flow down to the necessary minimum. EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/UE. Standards: EN 61326-1, EN 61010-1.